avoiding damage Archives - Electricman Inc.

All Posts tagged avoiding damage

Richardson Electrician | Helpful Electrical Safety Tips for Home Chandelier Installation

Editor’s Note: This article has been edited and updated from its original content with permission from National News Today. To view the original article please visit www.nationalnewstoday.com

Part of my job as an electrician is not only to help fix an electrical system when something goes wrong, but also to help my customers make sure that the fixtures are correctly installed. Installation is the most important phase for an electrical fixture or appliance; following the proper procedures can help ensure the maximum life for the electrical device, minimize its upkeep, and save you from costly repairs.

One of the most popular fixtures I am called to install are chandeliers, and with good reason.  As beautiful and elegant as they can be, home chandelier installation can be extremely tricky, even for those with experience.  If you have recently purchased a chandelier, I strongly encourage you to call a skilled Richardson electrician to have it installed; a talented electrician knows how to best hang, wire, and secure your chandelier to the ceiling. With that in mind, here are some important electrical safety tips to ensure you get the most out of your new light fixture:

  • Wiring: The best reason to hire an electrician to install your chandelier has to do with how it’s wired into your electrical system.  Most do-it-yourself homeowners can’t tell which wire in the chandelier connects to which ceiling wire, risking damage to your chandelier.  If you find yourself with this problem, remember that the side of the chandelier wire with the ridges or bumps (you can feel them clearly if you run your fingers along the wire) is the neutral or power “out”, while the opposite smooth side is the power “in” wire.
  • Proper order of installation: It’s really important that you follow the manufacturer’s instructions when installing the chandelier.  I can tell you from personal experience that people skip steps or go out of order all the time, which can be a real problem, especially for crystal chandeliers. I’ve arrived at an installation before to find all of the crystals already attached to the fixture, even though the instructions on ANY crystal chandelier tell you to install the fixture before you hang the crystals!  Crystal chandeliers with their crystals attached are incredibly heavy and extremely fragile. It is almost impossible for even a professional to install the chandelier properly in this state without breaking something.  Before you hang those crystals on an uninstalled chandelier, ask yourself this question:  do you want to show off your chandelier with its crystals broken?  Or worse, with your back broken?
  • Proper hanging procedures: Chandeliers are designed to hang from their chains. They are absolutely NOT designed to hang from the wire that connects them to your ceiling.  These wires are not designed to support any part of the fixture’s weight. Making it do so will inevitably stretch the wiring, leading to damage to the chandelier’s internal wiring, potential damage to your ceiling as the weight pulls the wiring out, and will stretch your wire, which is very dangerous and a severe fire hazard.  Always make sure the wire is loose, has a bit of slack, and isn’t being pinched by the chain links as it winds through them.
  • Ceiling Mounting: The canopy cover (the part that covers the hole in the ceiling the chandelier hangs from) should always be assembled and adjusted to the proper depth before you hook up the chandelier’s wiring. Do-it-yourself installers tend to try to screw the canopy cover in to get it flush to the ceiling, which can twist the wiring inside and lead to serious hazards.  If you’re having trouble getting the installation right, call a professional.
  • Weight Limits: If your chandelier weighs more than 100 pounds, your chandelier manufacturer requires additional wood bracing to be installed in your attic across the trusses to handle the load.  This has to be done carefully and in accordance with specifications, because the bracing will include a special high-tension braided steel safety wire that is connected to the chandelier in case of chain failure. (Obviously, I hope you’ll never need this.) Since this is a change in the engineering of your house, this sort of bracing should NEVER be self-installed or performed by a handyman or light fixture company installer;  only a licensed professional electrician can ensure the bracing will not fail, causing the chandelier to fall and destroy itself, along with anything underneath it:  flooring (even marble!), stairs, banisters, or your furniture.

For more information and other tips Electric Man to the rescue. We’re available 24 hours a day, 7 days a week, so don’t ever hesitate to give us a call! Visit our website to learn more or connect with our online community on Facebook, Twitter, Pinterest and Google Plus.

 

More